Experimental study of PLA thermal behavior during fused filament fabrication-Reference-Cited by-同舟云学术

Experimental study of PLA thermal behavior during fused filament fabrication

Published:2020-08-17 Issue:4 Volume:138 Page:49747
ISSN:0021-8995
Container-title:Journal of Applied Polymer Science
language:en
Short-container-title:J Appl Polym Sci

Author:

Vanaei Hamid Reza¹²^ORCID,Shirinbayan Mohammadali²,Costa Sidonie Fernandes³,Duarte Fernando Moura⁴,Covas José António⁴,Deligant Michael¹,Khelladi Sofiane¹,Tcharkhtchi Abbas²

Affiliation:

1. Arts et Metiers Institute of Technology, CNAM, LIFSE HESAM University Paris France

2. Arts et Metiers Institute of Technology, CNRS, CNAM, PIMM HESAM University Paris France

3. School of Technology and Management of Porto Polytechnic Institute CIICESI ‐ Center for Research and Innovation in Business Sciences and Information Systems Felgueiras Portugal

4. IPC ‐ Institute for Polymers and Composites, Department of Polymer Engineering University of Minho Guimarães Portugal

Publisher

Wiley

Subject

Materials Chemistry,Polymers and Plastics,Surfaces, Coatings and Films,General Chemistry

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.49747

Reference34 articles.

1. Optimization of fused deposition modeling process parameters: a review of current research and future prospects

2. Rapid manufacturing in the spare parts supply chain

3. Design of Fused-Deposition ABS Components for Stiffness and Strength

4. A review of process planning techniques in layered manufacturing

Cited by 40 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigating the tensile properties and crystallinity of 3D-printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend in the Z-direction by fused filament fabrication;Progress in Additive Manufacturing;2024-08-29

2. Effect of the Printing Scenario on the Dimensional Accuracy and the Tensile Strength of Different Colored PLA Specimens Produced by Fused Deposition Modeling;Applied Sciences;2024-08-29

3. Importance of Machine Learning in 3D Bioprinting;3D Bioprinting from Lab to Industry;2024-07-05

4. Quantitative correlation between temperature difference and sintering neck length in material extrusion-based additive manufacturing;Additive Manufacturing;2024-06

5. Analysis of thermal behavior in 3D printing of continuous fiber reinforced polymer composites;Materials Research Proceedings;2024-05-15