The use of graphene nanoplatelet‐embedded PA‐6 nanofibres to remove turbidity from water

Abstract

AbstractThe global challenge of providing clean water at an affordable cost has led to the need for the development of low‐cost and non‐toxic materials for the treatment and recycling of waste water. Nanofibres have emerged as a promising solution due to their superior properties. To this end, composite polyamide‐6 (PA‐6) nanofibres embedded with graphene nanoplatelets (GNPs) were prepared by electrospinning. The study investigated the effect of the ratio of GNPs, which ranged from 0.1 to 1.0 wt.%, on the mechanical properties of nanofibres and the removal of turbidity. The results showed that PA‐6 nanofibres with 0.5 wt.% GNP exhibited enhanced mechanical properties, and increasing the GNP ratio led to lower turbidity values. To the best of our knowledge, GNP‐embedded PA‐6 nanofibres have not been used for turbidity removal before, and these filter materials are promising due to their excellent fibre structure, mechanical strength, and high level of turbidity removal.