Enabling Scalable Polymer Electrolyte with Dual‐Reinforced Stable Interface for 4.5 V Lithium Metal Batteries

Abstract

AbstractHitherto, it remains a great challenge to stabilize the electrolyte–electrode interfaces and impede lithium dendrite proliferation in lithium metal batteries with high‐capacity nickel‐rich LiNxCoyMn1‐x‐yO2 (NCM) layer cathodes. Herein, a special molecular‐level designed polymer electrolyte is prepared by the copolymerization of hexafluorobutyl acrylate and methylene bisacrylamide to construct dual‐reinforced stable interfaces. Verified by X‐ray photoelectron spectroscopy depth profiling, there are favorable solid electrolyte interphase (SEI) layers on Li metal anodes and robust cathode electrolyte interphase (CEI) on Ni‐rich cathodes. The SEI enriched in lithiophilic N‐(C)3 guides the homogenous distribution of Li+ and facilitates the transport of Li+ through LiF and Li3N, promoting uniform Li+ plating and stripping. Moreover, the CEI with antioxidative amide groups could suppress the parasitic reactions between cathode and electrolyte and the structural degradation of cathode. Meanwhile, a unique two‐stage rheology‐tuning UV polymerization strategy is utilized, which is quite suited for continuous electrolyte fabrication with environmental friendliness. The fabricated polymer electrolyte exhibits a high ionic conductivity of 1.01 mS cm−1 at room temperature. 4.5 V NCM622//Li batteries achieve prolonged operation with a retention rate of 85.0% after 500 cycles at 0.5 C. This work provides new insights into molecular design and processibility design for polymer‐based high‐voltage batteries.This article is protected by copyright. All rights reserved