Crafting high‐performance polymer‐integrated solid electrolyte for solid state sodium ion batteries

Abstract

AbstractThe development of modern solid‐state batteries with high energy density has provided the reliable and durable solution needed for over‐the‐air network connectivity devices. In this study, a NASICON‐type Na3Zr2Si2PO12 (NZSP) ceramic filler was prepared using the sol‐gel method and then a polymer‐integrated solid electrolyte consisting of polyethylene oxide (PEO), NZSP, and sodium perborate (SPB) was prepared by Stokes' solution casting process. Through physico‐chemical and electrochemical characterization techniques, the morphology, electrochemical, and thermal properties of the prepared solid electrolyte sample were carefully studied. The PEO/NZSP/SPB electrolyte developed for all‐solid‐state sodium‐ion batteries (ASSSBs) exhibited a strong ionic conductivity, a large window for electrochemical stability, and was effective in controlling the growth of sodium dendrites. Furthermore, the polymer‐integrated solid electrolyte showed impressive rate capability, high discharge capacity (73.2 mAh g−1) at 0.1 mA cm−2, and good faradaic efficiency (98%) even after 100 cycles. These results reveal that the PEO/NZSP/SPB electrolyte is a potential and inevitable candidate for the evolution of high‐performance rechargeable ASSSBs.