Effect of shearing‐induced lipolysis on foaming properties of milk

Abstract

AbstractBACKGROUNDThe attraction of cappuccino‐style beverages is attributed to the foam layer, as it greatly improves the texture, appearance, and taste of these products. Typical milk has a low concentration of free fatty acids (FFAs), but their concentration can increase due to lipolysis during processing and storage, which is detrimental to the foamability and foam stability of milk. There are contradictory results in reported studies concerning the effects of FFAs on the foaming properties of milk due to differences in milk sources, methods inducing lipolysis, and methods of creating foam. In this study, the foaming properties and foam structure of milk samples whose lipolysis was induced by ultra‐turraxing, homogenisation, and microfluidisation (1.5–3.5 μ‐equiv. mL−1 FFAs) were investigated.ResultsCompared with others, microfluidised milk samples had the smallest particle size, lowest absolute zeta potential, and highest surface tension; thus exhibited high foamability and foam stability, and very small and homogeneous air bubbles in foam structure. For all shearing methods, increasing FFA content from 1.5 to 3.5 μ‐equiv. mL−1 markedly decreased the surface tension, foamability, and foam stability of milk samples. The FFA level that led to undesirable foam structure was 1.5 μ‐equiv. mL−1 for ultra‐turraxed milk samples and 2.5 μ‐equiv. mL−1 for homogenised and microfluidised ones.ConclusionShearing‐induced lipolysis greatly affected the physical properties of milk samples and subsequently their foaming properties and foam structure. At the same FFA level, lipolysis induced by microfluidisation was much less detrimental to the foaming properties of milk than lipolysis induced by ultra‐turraxing and homogenisation. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.