Continuous multi‐column capture of monoclonal antibodies with convective diffusive membrane adsorbers

Abstract

AbstractDownstream processing is the bottleneck in the continuous manufacturing of monoclonal antibodies (mAbs). To overcome throughput limitations, two different continuous processes with a novel convective diffusive protein A membrane adsorber (MA) were investigated: the rapid cycling parallel multi‐column chromatography (RC‐PMCC) process and the rapid cycling simulated moving bed (RC‐BioSMB) process. First, breakthrough curve experiments were performed to investigate the influence of the flow rate on the mAb dynamic binding capacity and to calculate the duration of the loading steps. In addition, customized control software was developed for an automated MA exchange in case of pressure increase due to membrane fouling to enable robust, uninterrupted, and continuous processing. Both processes were performed for 4 days with 0.61 g L−1 mAb‐containing filtrate and process performance, product purity, productivity, and buffer consumption were compared. The mAb was recovered with a yield of approximately 90% and productivities of 1010 g L−1 d−1 (RC‐PMCC) and 574 g L−1 d−1 (RC‐BioSMB). At the same time, high removal of process‐related impurities was achieved with both processes, whereas the buffer consumption was lower for the RC‐BioSMB process. Finally, the attainable productivity for perfusion bioreactors of different sizes with suitable MA sizes was calculated to demonstrate the potential to operate both processes on a manufacturing scale with bioreactor volumes of up to 2000 L.