Off‐axis compression behavior and failure mechanisms of needled carbon/quartz fiber reinforced phenolic resin composite based on acoustic emission

Abstract

AbstractThe effect of the off‐axis angle (note as θ) on compressive properties and failure mechanisms in needled carbon/quartz fiber reinforced phenolic resin (CF‐QF/PF) composite has been investigated. For this objective, a series of quasi‐static off‐axis compression tests were performed, and a more precise and general model for predicting the compressive modulus and strength has been proposed. Further, the acoustic emission (AE) technology, including parameter‐based analysis and the Hilbert Huang Transform (HHT) method, was also employed to scrutinize the intricate damage mechanisms. The results show that specimens with θ = 0° exhibit linear and brittle behavior and are the most dangerous scenarios because delamination (accounting for 58% of the total AE accumulative energy) dominates their failure. For specimens with small off‐axis angles (0° < θ ≤ 45°), the fiber‐matrix interface determines their compressive properties. While for specimens with large off‐axis angles(45° < θ ≤ 90°), the enhanced transverse load‐bearing capacity of fibers becomes the dominant factor, characterized by significant debonding (33% when θ = 60°) and fiber breakage (27% when θ = 90°). Finally, these results were verified by optical microscopy (OM) and scanning electron microscopy images (SEM).Highlights Off‐axis compression behaviors of needled CF‐QF/PF composite are studied. A more precise and general model for predicting off‐axis compression properties is proposed. Acoustic emission technology is used to quantify different types of damage. Failure mechanisms are revealed by combining in‐situ and offline techniques.