Affiliation:
1. Department of Biotechnology and Genetic Engineering Mawlana Bhashani Science and Technology University Tangail Bangladesh
2. Department of Pharmacy Mawlana Bhashani Science and Technology University Tangail Bangladesh
3. Department of Molecular Biology Universiti Putra Malaysia Serdang Selangor D.E. Malaysia
4. Biology Department Claflin University Orangeburg South Carolina USA
Abstract
AbstractCities in Bangladesh produce large amounts of solid waste (SW) through various human activities which severely pollutes our native environment. As a result, SW pollutes the three basic environmental elements (air, water, and soil) by increasing pathogenic microbial load, which might be hazardous to public health directly or indirectly. In this study, we conducted 30 samples (i.e., soil, water, and air) collected from areas where municipal solid wastes are dumped (Tangail Sadar Upazila, Bangladesh). All the samples were analyzed to assess bacteriological quality for presumptive viable and coliform count using different agar media. We performed serial dilution 10−3–10−10 times for soil and water samples, and the diluted samples were spread on Mac‐Conkey agar and nutrient agar plates. For the air sample, the sterile media containing petri‐dish was placed adjacent to the dumpsite of the municipal waste and kept for an hour. Then all the samples were incubated at 37°C overnight for total viable count (TVC) and total coliform count (TCC). Biochemical tests and PCR were performed for the identification of these microorganisms. The antibiogram study was performed to reveal their (identified bacteria) susceptibility against clinically used antibiotics according to the standard disk diffusion technique. The highest bacterial loads were found in the air: TVC 3.273 × 103 and TCC 1.059 × 103 CFU/plate; tube‐well water: TVC 8.609 × 103, and TCC 8.317 × 103 CFU/mL; in surface water: TVC 6.24 × 1013 CFU/mL and TCC 2.2 × 1012 CFU/mL; in soil: TVC 2.88 × 1011 and TCC 1.02 × 1011 CFU/g, respectively. Microbes from SW can be transmitted through air, dust particles, or flies, and here we found an average of 1120 microbes spread over 63.61 cm2 area per hour. Eight bacterial isolates (Pseudomonas spp., Klebsiella spp., E. coli, Proteus spp., V. cholera, Salmonella spp., Shigella spp., and Vibrio spp.) were identified by the biochemical test. Among them, E. coli and Shigella spp. were further ensured by PCR targeting bfpA and ipaH genes. Antibiotic susceptibility test results showed that E. coli isolates were highly resistant to erythromycin (80%); Shigella spp. were resistant to nalidixic acid (90%), whereas Salmonella spp. was found resistant to kanamycin (90%). Vibrio spp. were also resistant to azithromycin (80%) and erythromycin (80%), which should be a great concern for us. A semi‐structured survey revealed that 63% of respondents suffered from different clinical conditions (intestinal diseases) due to SW pollution. So, steps should be taken to improve the proper management and disposal of solid waste and liquid effluent to save our environment and public health.
Subject
Management, Monitoring, Policy and Law,Public Health, Environmental and Occupational Health,Pollution,Waste Management and Disposal