Generation of 2.8 µm fiber laser using an Erbium‐doped ZBLAN double‐clad fiber in a linear‐cavity‐free space experimental setup-Reference-Cited by-同舟云学术

Generation of 2.8 µm fiber laser using an Erbium‐doped ZBLAN double‐clad fiber in a linear‐cavity‐free space experimental setup

Published:2024-04 Issue:4 Volume:66 Page:
ISSN:0895-2477
Container-title:Microwave and Optical Technology Letters
language:en
Short-container-title:Micro & Optical Tech Letters

Author:

Cheng X.S.¹^ORCID,Lip Z.H.¹,Tan S.J.¹,Latiff A.A.²,Harun S.W.³^ORCID

Affiliation:

1. School of Engineering University of Wollongong Malaysia Shah Alam Selangor Malaysia

2. Faculty of Electronic and Computer Engineering Universiti Teknikal Malaysia Melaka Hang Tuah Jaya Melaka Malaysia

3. Photonics Engineering Laboratory, Department of Electrical Engineering, Faculty of Engineering University of Malaya Kuala Lumpur Malaysia

Abstract

AbstractMid‐infrared (MIR) fiber lasers are highly demand after for a variety of technological applications, including uses such as laser surgery, frequency metrology, and spectroscopy. This paper demonstrates a stable continuous‐wave laser operation in the 2.8 µm using an Er3+‐doped ZBLAN fiber operating in a free space experimental setting. A laser output power of 12.4 mW was attained in a linear cavity when this fiber was pumped at 2.9 W of 980 nm laser diode.

Publisher

Wiley

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/mop.34161

Reference42 articles.

1. Grand View Research. Laser Processing Market Size Share & Trends Analysis Report By Product (Gas Solid‐state Fiber) By Process (Material Processing Marking & Engraving Micro‐processing) by Application And Segment Forecasts 2022‐2030;2021.

2. Fiber Lasers: The 2 μm Market Heats Up

3. High power fiber lasers: current status and future perspectives [Invited]

4. Mid-infrared transmitter and receiver modules for free-space optical communication

5. Free-Space Communication With Directly Modulated Mid-Infrared Quantum Cascade Devices