Exploiting mono‐ and hybrid nanocomposite materials for fused filament fabrication with <scp>acrylonitrile butadiene styrene</scp> as polymer matrix-Reference-Cited by-同舟云学术

Exploiting mono‐ and hybrid nanocomposite materials for fused filament fabrication with acrylonitrile butadiene styrene as polymer matrix

Published:2022-07-28 Issue:41 Volume:139 Page:
ISSN:0021-8995
Container-title:Journal of Applied Polymer Science
language:en
Short-container-title:J of Applied Polymer Sci

Author:

Ceretti Daniel V. A.¹^ORCID,Fiorio Rudinei¹^ORCID,Van Waeleghem Tom¹^ORCID,Desmet Arne¹,Florizoone Bauke¹,Cardon Ludwig¹^ORCID,D'hooge Dagmar R.²³^ORCID

Affiliation:

1. Centre for Polymer and Material Technologies (CPMT), Department of Materials, Textiles and Chemical Engineering Ghent University Ghent Belgium

2. Laboratory for Chemical Technology (LCT), Department of Materials, Textiles and Chemical Engineering Ghent University Ghent Belgium

3. Centre for Textiles Science and Engineering (CTSE), Department of Materials, Textiles and Chemical Engineering Ghent University Ghent Belgium

Funder

Bijzonder Onderzoeksfonds UGent

Publisher

Wiley

Subject

Materials Chemistry,Polymers and Plastics,Surfaces, Coatings and Films,General Chemistry

Link

https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.52922

Reference72 articles.

1. Fused deposition modelling: Current status, methodology, applications and future prospects

2. A critical review on the fused deposition modeling of thermoplastic polymer composites

3. An overview of fused deposition modelling (FDM): research, development and process optimisation

4. Lifting the quality of fused filament fabrication of polylactic acid based composites

5. Melt exit flow modelling and experimental validation for fused filament fabrication: From Newtonian to non-Newtonian effects

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Correlation between the electrical and thermal conductivity of acrylonitrile butadiene styrene composites with carbonaceous fillers with different dimensionality;Polymer Composites;2024-08-13

2. Enhancing the Strength of Acrylonitrile–Butadiene–Styrene with Gas-Phase-Synthesized Graphene for Injection-Molding Applications;ACS Applied Nano Materials;2024-02-15

3. Effect of process parameters on performances measured in filament and pellets-based additively manufactured parts;Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering;2023-06-20

4. In silico quantification of 3D thermal gradients and voids during fused filament fabrication deposition to enhance mechanical and dimensional stability;Additive Manufacturing;2023-06

5. Thermal and Thermal-Oxidative Molecular Degradation of Polystyrene and Acrylonitrile Butadiene Styrene during 3D Printing Starting from Filaments and Pellets;Sustainability;2022-11-22