Abstract
In this paper the influence of tack welds distribution and welding sequence on angular distortion of the Tungsten Inert Gas (TIG) welded joint was tested. Additionally, the effect of welding current on angular distortion was assessed. For research X2CrTiNb18 (AISI 441) stainless steel (2.5 mm thick) was chosen. During research specimens were prepared with different distributions of tack welds. Then they were welded by different welding sequences with the use of different welding current values. After welding the angular distortion of each specimen was measured by using the coordinate measuring machine. In the next step specimens were cut. Cross-sections were polished and the metallographic macroscopic testing was conducted to check the geometry of performed welds. Performed experiments allowed determining the optimal tack weld sequence and welding parameters for welding thin stainless steel sheets.
Subject
Industrial and Manufacturing Engineering,Polymers and Plastics,Mechanical Engineering,Mechanics of Materials,Civil and Structural Engineering
Cited by
24 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献