Abstract
Abstract: The mining industry, despite its contributions to the economy of many countries, including developing ones, has caused significant damage to the environment. In this study, gold tailings were used as a potential alternative for natural sand in brick manufacturing. The materials and bricks made from these materials were evaluated both mechanically and environmentally, through particle size distribution, water absorption, compressive strength, and leaching characteristics. The results showed that the particle size of gold tailings was less than 2 mm, with a high percentage of silicon dioxide (71.8%). The compressive strength of the bricks made from gold tailings replacements ranged from 11.67 to 22.33 MPa, with the most promising strength being in T25% replacement. In terms of environmental leaching, the study revealed that most gold tailings replacements did not show any metal leaching, and the levels of metals detected were significantly low. There fore, this study concluded that using gold tailings as a replacement for natural sand in construction industries is a viable and promising alternative. This practice can reduce the disposal of gold tailings on mine sites, contributing to a more sustainable mining industry
Reference37 articles.
1. Antin, D. (2013). The South African mining sector: An industry at a crossroads. Economy Report South Africa, 1-22.
2. Bellenfant, G., Guezennec, A. G., Bodénan, F., d'Hugues, P., & Cassard, D. (2013, September). Re‐processing of mining waste: Combining environmental management and metal recovery?. In Mine Closure 2013 (pp. 571-582).
3. Xu, D. M., Zhan, C. L., Liu, H. X., & Lin, H. Z. (2019). A critical review on environmental implications, recycling strategies, and ecological remediation for mine tailings. Environmental Science and Pollution Research, 26, 35657-35669
4. Hooke, R. L., Martín Duque, J. F., & Pedraza Gilsanz, J. D. (2012). Land transformation by humans: a review.
5. Zheng, W. (2013). Analysis of the proportion of aerated concrete block materials produced by using gold tailings. Sci. Technol. Vis, 8, 24-25.