Wall-to-Suspension Heat Transfer in a CFB Downcomer

Abstract

With the development of circulating fluidized beds (CFB) and dense upflow bubbling fluidized beds (UBFB) as chemical reactors, or in the capture and storage of solar or waste heat, the associated downcomer has been proposed as an additional heat transfer system. Whereas fundamental and applied research towards hydrodynamics has been carried out, few results have been reported on heat transfer in downcomers, even though it is an important element in their design and application. The wall-to-suspension heat transfer coefficient (HTC) was measured in the downcomer. The HTC increases linearly with the solids flux, till values of about 150 kg/m2 s. The increasing HTC with increasing solid circulation rate is reflected through a faster surface renewal by the downflow of the particle-gas suspension at the wall. The model predictions and experimental data are in very fair agreement, and the model expression can predict the influence of the dominant parameters of heat transfer geometry, solids circulation flow, and particle characteristics.