An Empirical Model for Geopolymer Reactions Involving Fly Ash and GGBS

Abstract

Numerous works are reported in literature regarding the enhancement of compressive strength of fly ash-GGBS geopolymer combinations with addition of alkali activators of varying concentrations. However, a limited study has been chronicled, revealing the specific role of alkali or alkaline earth contributed by the fly ash-GGBS combinations on the compressive strength development. It is well known that the strength of a geopolymer is dependent on gel formation from Al/Si ratio, Ca/Si ratio, and Ca/(Si + Al) ratio but their exact role when cured for various extended periods is unknown as yet. In the present study, alkali concentration in a fly ash-GGBS geopolymer combination was varied from 6 M to 12 M with increments of two mol in six different fly ash-GGBS combinations with a minimum of 20 percent and a maximum of 70 percent GGBS. The correlation coefficients between compressive strength and Al/Si, Ca/Si, and Ca/(Si + Al) ratios exhibited values higher than 0.95 taken individually. Multiple linear regression analysis with compressive strength (as dependent parameter) and individual values of Al/Si, Ca/Si, and Ca/(Si + Al) ratios (as independent parameters) was effectuated. It was observed that, depending on the composition, the compressive strength circumstantiated a changeover from Ca/Si to Ca/(Si + Al) ratio in the intermediate composition range. Such a detailed analysis is considered supportive of developing a suitable composition which will provide the optimum compressive strength of the combination.