Affiliation:
1. School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
2. School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004, China
Abstract
In the teaching of plastic mechanics and applications of slip-line theory using conventional methods, multivalued results are usually caused by the uncertain direction of the slip line and dip angles. Determination rules for the α and β directions and φ values are proposed to improve slip-line theory according to the particle flow law under the effect of principal stress, and slip lines and dip angles suitable for a typical stress boundary problem are described. The α and β slip lines should simultaneously point to or away from the intersection, and the synthetic direction of the slip lines should point to the first principal stress σ1 or away from the direction of the third principal stress σ3. When the Hencky stress equation of the α line is applied, two points on the α line should maintain the same direction, and the absolute value of the φ difference should be less than or equal to π. Moreover, the α line of two points should simultaneously point to the inner and outer normal direction of the β line when the Hencky stress equation of the β line is used. The average stress and critical load of plastic deformation in the plane lath V-notch tension are solved using slip-line theory. Both the calculated critical stress and the load maintain uniformity using different slip lines and dip angles, and the proposed determination rule reliably avoids multivalued solutions. This is important for students and researchers in correctly understanding and applying slip-line theory.
Funder
Hebei Higher Education Teaching Reform Research Project
Subject
Computer Science Applications,General Engineering,Modeling and Simulation
Reference13 articles.
1. Mechanics method in plastic deformation processes;B. Y. Xu;Mechanics in Engineering,1993
2. Research on non-Prandtl solution of coarse plane punch pin pressed in the semi-unfinite body in slip line teaching;R. B. Mei;Mechanics in Engineering,2022
3. Analysis of slip-line model for serrated chip formation in orthogonal machining of AISI 304 stainless steel under various cooling/lubricating conditions
4. Ultimate bearing capacity of strip footings placed near slopes determined by rigorous slip line field theory;C. C. Li;Chinese Journal of Geotechical Engineering,2021
5. Combined analysis of vertical rolling force with slab method and slip-field;Y. F. Zhang;Journal of Plasticity Engineering,2020