TiC0.5N0.5-Based Cermets with Varied Amounts of Si3N4Nanopowders Prepared by Spark Plasma Sintering

Abstract

TiCN-based cermets with varied fractions of Si3N4nanopowder (0–5 wt.%) were prepared by spark plasma sintering. The microstructural and mechanical properties of these cermets were investigated. In general, with increasing addition amount of Si3N4nanopowder the relative density as well as mechanical properties of the as-prepared TiCN cermets increased first and then decreased. The samples containing 2 wt.% Si3N4nanopowder presented the best performance with the relative density of about 98%, bending strength of 1000 MPa, and Vickers microhardness of about 1810 HV10.