The Effect of Cerium Oxide Addition on the Properties and Behavior of Y-TZP

Abstract

The effects of CeO2 addition on the sintering behavior and mechanical properties of Y-TZP have been investigated over a wide sintering regime by pressureless sintering. It has been revealed that small additions of CeO2 (0.3–1.0 wt%) to Y-TZP were beneficial in enhancing the mechanical properties and hydrothermal ageing resistance of Y-TZP. Sintered samples were used to evaluate the bulk density, Vickers’s hardness, Young’s modulus, and fracture toughness of the material. CeO2 doped Y-TZPs were sintered at relatively low temperatures (1250°C and 1350°C) retaining high bulk density (>97% of theoretical density) and high Young’s modulus (>200 GPa) without sacrificing tetragonal phase stability. The optimum level of dopant was found to be at 0.5 wt% for sintering between 1250°C and 1450°C using the standard 2 h holding time cycle, with sintered body exhibiting excellent combination of properties when compared to the undoped ceramics. In this experiment, the addition of 0.5 wt% recorded a bulk density reading of 5.9 g/cm3, Vickers hardness value of 13.2 GPa, Young’s modulus value of 211 GPa, and fracture toughness of 6.4 MPam1/2, respectively, in a temperature range of 1400–1450°C.