Affiliation:
1. Department of Electronic Engineering, Pusan National University, Busan, Republic of Korea
Abstract
Dead reckoning is an important aspect of estimating the instantaneous position of a mobile robot. An inertial measurement unit (IMU) is generally used for dead reckoning because it measures triaxis acceleration and triaxis angular velocities in order to estimate the position of the mobile robot. Positioning with inertial data is reasonable for a short period of time. However, the velocity, position, and attitude errors increase over time. Much research has been conducted in ways to reduce these errors. To position a mobile robot, an absolute positioning method can be combined with dead reckoning. The performance of a combined positioning method can be improved based on improvement in dead reckoning. In this paper, an ultrasonic anemometer is used to improve the performance of dead reckoning when indoors. A new approach to the equation of an ultrasonic anemometer is proposed. The ultrasonic anemometer prevents divergence of the mobile robot’s velocity. To position a mobile robot indoors, the ultrasonic anemometer measures the relative movement of air while the robot moves through static air. Velocity data from the ultrasonic anemometer and the acceleration and angular velocity data from the IMU are combined via Kalman filter. Finally we show that the proposed method has the performance with a positioning method using encoders on a good floor condition.
Subject
Electrical and Electronic Engineering,Instrumentation,Control and Systems Engineering
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献