Application of Digital 3D Printing Technology in Ceramic Art Creation

Abstract

3D printing technology is a modern technical means and process based on three-dimensional molding, digital manufacturing, reverse engineering, and other emerging fields. 3D printing ceramics is one of the diversified designs of modern ceramics. At the same time, with the development of 5G technology, the platform access method will make 3D printing easier and more common. The purpose of this paper is to study the printing, preparation, and sintering processes of ceramic materials based on 3D printing technology and realize the rapid prototyping of ceramic parts, which can meet the requirements of low-cost, single-piece, and small-batch processing. This paper proposes to focus on the research on materials, design methods, and technological processes suitable for ceramic 3D printing technology from the perspective of the integration of art and science. By using 3D printing technology to perform geometric functions, mixing, recombination, and other cutting-edge tasks, the composite design of works is enhanced. The experimental results show that in the high temperature sintering stage, 1600°C is the holding temperature, the heating rate is 0.5°C/min, and the holding time is 600 min, and the sintering effect of ceramic parts is better. The measured shrinkage rate of the ceramic sample does not exceed 16%, the porosity is 47%, the bulk density is 2.27 g/cm3, and the density is 53.2%. The results show that the ceramic parts prepared by this process can meet the basic performance requirements.