Importance of Hardening Effect and Its Analysis on Diametrical Fractured Ends of Tensile Testing of Al and Steel-Reference-Cited by-同舟云学术

Importance of Hardening Effect and Its Analysis on Diametrical Fractured Ends of Tensile Testing of Al and Steel

Published:2022-07-15 Issue: Volume:2022 Page:1-10
ISSN:1687-8442
Container-title:Advances in Materials Science and Engineering
language:en
Short-container-title:Advances in Materials Science and Engineering

Author:

Ponnusamy Muruganantham¹^ORCID,Pungaiah S. Suresh²^ORCID,Prabhu M. Senthil³,Ramji B. R.⁴,Srinivas Y.⁵,Periyasamy Selvakumar⁶^ORCID

Affiliation:

1. Indian Institute of Information Technology, Kalyani, West Bengal, India

2. Department of Mechanical Engineering, SRM Valliammai Engineering College, Chennai, Tamil Nadu, India

3. Department of Mechanical Engineering, Panimalar Institute of Technology, Chennai, Tamil Nadu, India

4. Department of Industrial Engineering and Management, B.M.S College of Engineering, Bangalore, Karnataka, India

5. Department of Mechanical Engineering, Vishnu Institute of Technology, Bhimavaram, Andhra Pradesh, India

6. Department of Chemical Engineering, School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 888, Ethiopia

Abstract

The hardening effect varies deliberately to elevate the properties of alloy specimens either in ferrous or nonferrous materials. The cup and cone fracture theory explains the effect of hardening through heat treatment of the specimen. The hardening effects are imposed on the specimen by the furnace heating and hot pressing method. The neck formation and the elongation levels are evaluated and compared for both heat-treated and non-heat-treated specimens of steel and aluminum alloys. The simulation tools are used to predict the compressive and elongation levels by obtaining the stresses and deflections at various nodal points. The suitable heat treatment was indicated by the single or twice method of heat adoption over the steel and aluminum specimens. The fracture analysis and experimental results are compared among the hardened or non-heat-treated specimens.

Publisher

Hindawi Limited

Subject

General Engineering,General Materials Science

Link

http://downloads.hindawi.com/journals/amse/2022/8579749.pdf

Reference26 articles.

1. Structural, magnetic and electrical properties of Al3+ substituted Ni−Zn ferrite nanoparticles;Hashim;Journal of Alloys and Compounds,2012

2. Effect of cryogenic treatment on the microstructure and wear resistance of X45Cr9Si3 and X53Cr22Mn9Ni4N valve steels;Jaswin;Tribology Transactions,2011

3. Tensile behavior of aluminium alloy 6063 - T6 in sea water;P. John Maclins;International Journal of Engineering Research and Development,2014

4. Effect of heat treatment on tensile and fracture toughness properties of 6082 alloy;G. Mrówka-Nowotnik;Journal of Achievements in Materials and Manufacturing Engineering,2009

5. Influence of heat treatment on the mechanical properties of aluminium alloys (6xxx series): a literature review;P. S. C. Krishna;International Journal of Engineering Research and Technology,2017