Sol-Gel Synthesis of TiO2 Nanocrystalline Particles with Enhanced Surface Area through the Reverse Micelle Approach

Abstract

Titania nanocrystalline particles were synthesized by hydrolysis-condensation of titanium tetraisopropoxide in water-in-oil micellar solutions of water/cyclohexane/Triton X-100 system, and the effects of reflux time and water-to-surfactant molar ratio on the particle uniformity, crystallinity, and surface area were studied. Several characterization techniques including TEM and SEM, as well as X-ray diffraction and FT-IR spectroscopy, helium pycnometry, and nitrogen physisorption, were employed to evaluate the particle density and dimensions, crystallite size, surface area value, and the porosity features in the as-prepared condition and also after thermal treatment at 500°C. The results show that all treated samples are dense nanocrystalline anatase particles with BET surface area values over 100 m2·g−1 and primary particle size of 10–15 nm. However, for the as-prepared samples, as the reflux time increases, a better purification of particles from the synthesis environment is resulted, leading to denser and more crystalline powders with smaller particle size and higher BET surface area values culminating in 179 m2·g−1 for 24 hours of refluxing. Moreover, decreasing the water-to-surfactant molar ratio from 10 to 5 and 2 increases the particles surface area to 239 and 224 m2·g−1, respectively, at the expense of slight density and crystallinity degradation and considerable prolongation of surfactant removal step. Supportively, the comparison between photocatalytic activities of as-prepared samples also evidences the effectiveness of reflux time extension on improving the sample features and enhancing their functionality. This study can highlight how the earlier synthesis steps can influence the evolution of the structure of the final products.