Investigating the Effect of Nonrigid Connectors on the Success of Tooth-and-Implant-Supported Fixed Partial Prostheses in Maxillary Anterior Region: A Finite Element Analysis (FEA)

Abstract

Objective. This study was designed to assess the effect of nonrigid connectors (NRCs) and their location in the success of tooth-and-implant-supported fixed prostheses in the maxillary anterior region by finite element analysis (FEA). Materials and Methods. Three 3D FEA models were designed, presuming maxillary lateral incisor and canine to be extracted. Implant (replacing canine), abutment, bone (spongious and cortical), central incisor (containing dentin, root cement, gutta-percha, and casting post and core), periodontal ligament, and three three-unit cemented PFM prostheses (a rigid one and two nonrigid) were modeled. The NRC was once in the tooth side and once in the implant side. The prostheses were loaded twice: 250N to the incisal edges (0° to the long axis) and 200 N to the cingula (45° to the long axis). The von-Mises stress and vertical displacement were analyzed. Results. Under both vertical and oblique loadings, the rigid model presented the highest stress. Under vertical loading, the NRC caused a significant decrease in the applied stress to the prosthesis, bone, implant, and tooth. Locating the NRC in the tooth side decreased the applied stress to the prosthesis and NRC. Under oblique loading, prosthesis and implant tolerated less stress in the presence of an NRC. Placing the NRC in the tooth side resulted in the least stress in all of the components except for porcelain and patrix. Vertical displacement of the tooth apex was approximately equal in all models. Conclusion. Using an NRC on the tooth side is the most efficient method in reducing the applied stress to prosthesis, implant, tooth, and bone. The amount of intrusion is not dependent on using an NRC or not.