Analytical and Numerical Investigation of Lacing Wire Damage Induced Mistuning in Turbine Blade Packet

Abstract

Investigations of modal parameters for a mistuned packet of turbine blades due to lacing wire damage are reported using analytical and numerical studies with a simplified model. The turbine blade is assumed to be an Euler-Bernoulli beam connected with a lacing wire which is modeled as a mass less linear elastic spring. Thus, the blade is considered as a continuous system and lacing wire as a discrete system. The analytical results using Eigen value analysis are compared with numerical results obtained using commercial finite element package. In real life situation, though not reported in the literature, it is the failure of lacing wire that occurs quite often compared to the turbine blade and acts as precursor to the subsequent blade damage if it goes undetected. Therefore, studying the modal parameters of the grouped turbine blades in the context of lacing wire failure becomes important. The effect of variation of lacing wire location and stiffness indicative of damage resulting in the loss of stiffness on modal parameters is investigated. The study reveals a lot of fundamental understandings pertaining to dynamic behavior of grouped blades compared to the stand-alone blade under the influence of damaged lacing wire.