Measurement of Hepatitis B Surface Antigen Concentrations Using a Piezoelectric Microcantilever as a Mass Sensor

Abstract

Hepatitis B surface antigen (HBsAg) concentrations were measured using a piezoelectric microcantilever sensor (PEMS) developed by the authors. The developed PEMS is label-free and detects the sensing signal electrically. It was designed to measure the mass of biomolecules attached to it using an accurate mass-microbalancing technique; its probe area is confined to the end of the cantilever, and its equivalent spring constant is relatively high to minimize the effect of changes in the surface stress when the biomolecules are attached to it. The “dip- and-dry” technique was used to enable the probe area of the sensor to react with reagents in controlled environmental conditions. HBsAg was detected by an immunoreaction whereas the reaction time, antibody density, and its area on the probe were kept at a constant level. The mass of the detected HBsAg was measured in the range of 0.1–100 ng/mL.