Affiliation:
1. Hangzhou Polytechnic, Hangzhou 311402, China
2. Zhejiang Sci-Tech University, Hangzhou 310018, China
Abstract
At present, the robot developed only has partial intelligence, and it cannot be well controlled independently for some jobs, so it should optimize its path and trajectory. However, as an industrial robotic arm robot necessary for advanced industrial manufacturing enterprises, it has been replacing humans to perform simple and repetitive actions, and it is doing better and better. For the six-degree-of-freedom (6-DoF) manipulator, this paper aims to optimize the trajectory planning of the manipulator based on deep learning technology. Therefore, this paper presents a fuzzy control algorithm for the trajectory planning of the manipulator based on the neural network algorithm. The experimental results show that for the established three-joint dynamic model, the moment received by joint 1 is the largest, followed by joint 2, and joint 3 is the smallest, which can better simulate the trajectory of the robotic arm.
Subject
Computer Networks and Communications,Computer Science Applications
Reference20 articles.
1. Remote control of a robotic prosthesis arm with 6-DoF for ultrasonic scanning and three-dimensional imaging;Q. Huang;Biomedical Signal Processing and Control,2019
2. On Intensity-Based Nonmetric Visual Servoing
3. Using Navi-Robot and a CT Scanner to Guide Biopsy Needles
4. w Dynamically Modified Penalty Function for Control of Mitsubishi Robotic Arm in Real Time
5. Control of SIMO systems in simulation: the challenge of the multiple axes actuating pneumatic arm;G.P Smyrnaiou;International Journal of Computer Application,2017