Research on Cavitation Flow Dynamics and Entropy Generation Analysis in an Axial Flow Pump

Author:

Shen Simin123ORCID,Huang Bensheng1ORCID,Huang Si3ORCID,Xu Shun4ORCID,Liu Shufeng1ORCID

Affiliation:

1. Guangdong Research Institute of Water Resources and Hydropower, Guangzhou 510610, China

2. School of Water Resources and Hydropower Engineering, Wuhan University, Wuhan 430072, China

3. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China

4. School of Aerospace Engineering, Huazhong University of Science and Technology, Wuhan 430074, China

Abstract

The entropy generation theory is introduced to investigate the effects of different NPSH and tip clearance size on the cavitation flow dynamics and mechanical energy dissipation intuitively and quantitatively within an axial flow pump through numerical simulations. The results indicate that main mechanical energy dissipation of the pump gathers in part impeller and diffuser, and most are turbulent dissipation. Meanwhile, the impeller is the largest place of mechanical energy dissipation of the pump under cavitation conditions, accounting for more than 50%. NPSH has significant effects on the cavitation pattern, which reflects on the field that the areas of attached sheet cavitation and tip leakage vortex cavitation around blades increase obviously with NPSH reducing under the tip clearance of 0.1% span. With NPSH decreasing, high regions of turbulent dissipation in the impeller mainly expands along blades and move downstream, with span S0.98 near the shroud having larger turbulent dissipation. Besides, high regions of turbulent dissipation are mainly distributed at the rear part of the cavity for every corresponding span of the impeller, which indicates that the turbulent dissipation has a strong relation with the cavitation pattern. In the impeller, the unstable flows cause cavity shedding at the rear of the cavity and wake flows near the blade trail induce higher turbulent kinetic energy, finally resulting in higher turbulent dissipation there. Under the same NPSH, areas of tip leakage vortex cavitation and areas of tip clearance cavitation around the tip both expand with the tip clearance increasing from 0.1% span to 0.8% span. And high areas of turbulent dissipation also are distributed at the rear of the cavity and moving downstream along the blade suction side, especially at span S0.98. Therefore, the tip clearance width mainly affects the cavitation development and turbulent dissipation distribution near the impeller’s shroud under same NPSH.

Funder

National Natural Science Foundation of China

Publisher

Hindawi Limited

Subject

Electrical and Electronic Engineering,Instrumentation,Control and Systems Engineering

Cited by 3 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3