Analysis of the Noise Reduction Characteristics of a Diffuser with Fizeau Interferometry

Abstract

To solve the coherent noise problem of an interference image, the method of a rotating diffuser was adopted to change the coherence of a beam to reduce the noise of the interference system. The relationship between the speed of the diffuser and the signal-to-noise ratio (SNR) of the fringe contrast system was simulated to obtain the diffuser control parameters needed for the best interference fringe state. The fringe contrast of each image and the SNR of the system were analyzed. The results showed that the increased speed of the diffuser reduced the contrast of the interference image to a certain extent, but the increased speed also effectively improved the SNR and facilitated the subsequent interference image processing. Due to the coherent noise in the interferometric system, the method of the rotated diffuser reduced the coherence of the light beam to suppress the noise of the interference image. By analyzing the coherent noise reduction characteristics of the rotated diffuser with different surface roughnesses, the relationship between the surface roughness and the noise contrast for different rotation speeds was simulated, and the effective roughness range with the noise reduction effect was selected. A noise reduction system was built based on Fizeau interference, and the noise contrast of the interference image was collected and calculated. The effective range of σh/λ was 0.2–0.5 when the rotation speed was 10 r/s, while the effective range of σh/λ was 0.4–0.6 when the rotation speed was 100 r/s. The experimental results showed that the surface roughness and wavelength ratio σh/λ of the rotated diffuser increased when the noise contrast tended toward 1, but the effective range of the surface roughness decreased with the increase of the rotational speed of the diffuser.