Affiliation:
1. Spine Division of Orthopaedic Department, Tongji Hospital, Tongji University School of Medicine, 389 Xincun Road, Shanghai 200065, China
2. Department of Histology and Embryology, Tongji University School of Medicine, 1239 Siping Road, Shanghai 200092, China
Abstract
Facetectomy is an important intervention for spinal stenosis but may lead to spinal instability. Biomechanical knowledge for facetectomy can be beneficial when deciding whether fusion is necessary. Therefore, the aim of this study was to investigate the biomechanical effect of different grades of facetectomy. A three-dimensional nonlinear finite element model of L3–L5 was constructed. The mobility of the model and the intradiscal pressure (IDP) of L4-L5 for standing were inside the data from the literature. The effect of graded facetectomy on intervertebral rotation, IDP, facet joint forces, and maximum von Mises equivalent stresses in the annuli was analyzed under flexion, extension, left/right lateral bending, and left/right axial rotation. Compared with the intact model, under extension, unilateral facetectomy increased the range of intervertebral rotation (IVR) by 11.7% and IDP by 10.7%, while the bilateral facetectomy increased IVR by 40.7% and IDP by 23.6%. Under axial rotation, the unilateral facetectomy and the bilateral facetectomy increased the IVR by 101.3% and 354.3%, respectively, when turned to the right and by 1.1% and 265.3%, respectively, when turned to the left. The results conclude that, after unilateral and bilateral facetectomy, care must be taken when placing the spine into extension and axial rotation posture from the biomechanical point of view.
Funder
National Natural Science Foundation of China
Subject
Health Informatics,Biomedical Engineering,Surgery,Biotechnology
Cited by
39 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献