Spray-Dried Quercetin-Lactose Powders for Oral Tablets with Improved Dissolution Rates and Modified Material Properties

Abstract

This study is aimed at using spray drying method to codisperse it with the commonly used drug carrier lactose in different solvents and then pass it through a spray dryer to obtain different samples. The results showed that the dissolution rate and solubility of the samples obtained by dispersion in hot water and 25% ethanol were significantly higher. The water of crystallization peaks of the raw material disappeared at 105-125°C and 130-150°C (DSC). The excipient lactose had a small upward exothermic peak at 177°C and a significant heat absorption peak at 209°C before untreated (XRD). α-Lactose peaks were observed at 12.5°, 19.1°, 19.6°, and 19.9° at 2θ in both samples, and β-lactose peaks were found at 10.5° at 2θ in sample A, but not in sample B (FTIR). The complex sharp peaks of lactose at 1100 cm-1 and quercetin at 1700-1000 cm-1 became moderated (SEM). The sample obtained by spray drying has a slit-type mesoporous structure with an average pore size of about 9.3 nm.