Monitoring Stress State of H-Shape Steel Using Ceramic Piezoelectric Sensor: A Feasibility Study

Abstract

To monitor the stress state and yield capacity of H-beams across their entire service process, a real-time monitoring method based on the energy signal response of ceramic piezoelectric sensors is proposed in this paper. The method is applied to conduct loading experiments on H-beams under different load values and web heights. Then, the amplitude and energy of the piezoelectric signals under the two working conditions are compared and analyzed, and the finite element analysis results are verified. The experimental results show that the time-domain waveform energy index increases under an increase in web height or load. Taking the H-section steel member with a web height of 10 cm as an example, when the load value is less than 500 kN/m, the energy index increases (on average) by ~10.5% for every 100 kN/m load increase; when the load value exceeds 500 kN/m and is below 675 kN/m (yield load), the same load increases the energy index by ~13.4%. Meanwhile, a 1 cm average increase in web height increases the energy index by ~14.6%. The finite element simulation results indicate that the ceramic piezoelectric sensor load increases under external load increases up to the yielding load. Because the stress state at the sensor location directly determines the stress wave propagation, the critical buckling loads of H-beams can be predicted using the energy index.