Affiliation:
1. Department of Mechanical Engineering, University of Mines and Technology, Tarkwa, Ghana
2. Department of Mechanical Engineering, Jomo Kenyatta University of Agriculture and Technology, Juja, Kenya
Abstract
Inclusions, pores, and cracks which are defects in materials are important in determining the structural integrity and durability of components. Modeling accurately, these defects are hence of interest to both theorist and the practitioner. CAD models were designed using Autodesk Inventor software, and simulation was performed using ANSYS academic software. Material saving in design of conveyor chain links has gained popularity, and this has led to the introduction of necks in its geometry. However, the effect of necking on various parameters was not considered. Also, inclusions which are defects in material are known to have adverse effect on the conveyor chain link. It is, therefore, imperative to predict numerically, the effects that inclusions and necking have on conveyor chain links This paper focusses on modeling nonmetallic inclusions and also tests various models of different neck radii using the finite element method so as to predict its effect.
Funder
University of Mines and Technology
Subject
Electrical and Electronic Engineering,Industrial and Manufacturing Engineering,Hardware and Architecture,Mechanical Engineering,General Chemical Engineering,Civil and Structural Engineering
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献