Affiliation:
1. Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China
2. National Demonstration Center for Experimental Mechanical Engineering Education (Shandong University), Jinan 250061, China
Abstract
Tooth flank fracture (TFF) and tooth interior fatigue fracture (TIFF) usually occur on case-harden gears in electromechanical coupling systems, both starting from the core caused by metal fatigue. The cracks propagate rapidly compared with the total life of a gear, so that it is necessary to detect and identify the faults in time when they take place in order to avoid danger. In this paper, the time-varying mesh stiffness model of two types of faults is established by the potential energy method and validating by the finite element method. Based on the stiffness model, the influence of faults on the electromechanical system and their fault characteristics are analyzed, which provides a theoretical basis for the health detection of electromechanical coupling systems. The results indicate that in the early stage of the three faults, i.e., tooth root fracture, tooth interior fatigue fracture, and tooth flank fracture, it is hard to discriminate the faults. But after the second stage, the faults can be distinguished by the vibration amplitude, frequency band components, and phase diagrams. The TFF can be discerned into different stages by frequency domains and phase diagrams. When the fracture occurs completely, three faults can be easily distinguished by the time domain and phase diagram. In the frequency domain, the TRF can also be distinguished from the other two faults by referring to the sideband component near the meshing frequency.
Funder
National Natural Science Foundation of China