STUDY OF DROPLET TRANSFER CHARACTERISTICS AND WELD FORMATION WITH ER430LNb FERRITIC STAINLESS STEEL DURING GAS METAL ARC WELDING

Abstract

An ER430LNb ferritic stainless steel wire was used for a gas metal arc welding (GMAW) test. The characteristics of droplet transfer and its corresponding voltage and current waveforms were investigated using a high-speed camera and synchronous acquisition of electrical signals. The weld formation, droplet transfer patterns and corresponding microstructures under different welding parameters were observed, and the effect of the current level on the droplet transfer frequency was discussed. As the results show, there were three typical metal transfer patterns during the GMAW using the ER430LNb ferritic stainless steel wire, namely short circuit transfer, mix transfer and spray transfer. With an increase in the welding current, the weld formation is changing constantly, and the droplet transfer frequency increases exponentially. With the change in the transfer pattern, the columnar ferrite structure of the weld is continuously coarsening. In addition, hardness measurements were taken on joints welded at different welding currents for comparison.