Affiliation:
1. Russian University of Transport
2. Rossiyskiy universitet transporta
Abstract
Techniques of prevention of locomotive wheelsets skidding were analyzed. The relevance of using object modeling techniques to automate the design of devices to prevent skidding is shown. The main task the solution of which is devoted to the article is the synthesis of the object model of technical solutions of such devices, the calculation and compilation of matrices of measures for inclusion, intersection and similarity. As a result of object modeling, the closest technical solution (prototype) was chosen, its characteristic features and disadvantages were identified. Novelty of results obtained in the present article consists in proposed device for prevention of skidding, application of which makes it possible to reduce power losses caused by eddy currents created by magnetic field in wheels and rail, to reduce energy consumption for creation of magnetic field, due to the fact that magnetic field is created only at possibility of wheels skidding and current values are maintained at minimum required level. The methodology and results of the scientific investigation can be used in the synthesis of new technical solutions aimed at improving the components of the crew of locomotives
Publisher
Bryansk State Technical University BSTU
Reference8 articles.
1. Воробьев, В.И. Поиск рациональных технических решений тепловоза для восточного полигона / В.И. Воробьев, А.А. Пугачев, О.В, Измеров, Е.В. Николаев // Вестник Брянского государственного технического университета, 2021. – № 10 (107). – С. 53 – 63., Vorobiev V.I., Pugachev A.A., Izmerov O.V., Nikolaev E.V. Search for Ways to Improve the Traction Properties of Locomotives and Traction Drive Design. Bulletin of Bryansk State Technical University. 2021; 10(107):53-63.
2. Космодамианский, А.С. Системы скалярного управления тяговым асинхронным двигателем / В.И. Воробьев, А.А. Пугачев // Электротехника, 2016. – № 9. – С. 44 – 50., Kosmodamianskiy A.S., Vorobiev V.I., Pugachev A.A. Scalar Control Systems for a Traction Induction Motor. Russian Electrical Engineering. 2016; 9:44-50.
3. Маслов, М.А. Совершенствование конструкции магнитных усилителей сцепления колёс локомотива с рельсами при осевом расположении индуктора / М.А. Маслов, В.О. Корчагин //Труды Ростовского государственного университета путей сообщения, 2018. – №4. – С. 71 – 74., Maslov M.A., Korchagin V.O. Improvement of Design of Magnetic Amplifiers of Locomotive Wheels Coupling with Rails at Axial Location of Inductor. Bulletin of Rostov State Transport University. 2018; 4:71-74.
4. Воробьев, В.И. Метод объектного моделирования при разработке патентоспособных конструкций узлов тягового привода / В.И. Воробьев, А.А. Пугачев, С.О. Копылов, Е.В. Николаев // Автоматизация и моделирование в проектировании и управлении, 2021. – № 3-4 (13-14). – С. 4 – 13., Vorobiev V.I., Pugachev A.A., Kopylov S.O., Nikolaev V.O. The Method of Object Modeling in the Development of Patentable Designs of Traction Drive Mechanisms. Automation and Modeling in Design and Management. 2021; 3-4(13-14):4-13.
5. Космодамианский, А.С. Применение объектной модели для конструирования тягового привода локомотива / А.С. Космодамианский, Д.Я. Антипин, М.А. Маслов, Д.Н. Шевченко // Вестник Брянского государственного технического университета, 2019. – № 10 (83). – С. 39 – 47., Kosmodamianskiy A.S., Antipin D.Ya., Maslov M.A., Schevchenko D.N. Object Model Use For Locomotive Traction Drive Design. Bulletin of Bryansk State Technical University. 2019; 10(83):39-47.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献