Influence of reversible surface plastic deformation parameters on the parameters of the surface waviness of cylindrical parts-Reference-Cited by-同舟云学术

Influence of reversible surface plastic deformation parameters on the parameters of the surface waviness of cylindrical parts

Published:2023-02-28 Issue: Volume: Page:37-48
ISSN:2223-4608
Container-title:Science intensive technologies in mechanical engineering
language:en
Short-container-title:

Author:

Zaides Semen¹,Nguyen Huu²

Affiliation:

1. Irkutsk State Technical University

2. Irkutsk National Research Technical University

Abstract

The results of experimental studies to determine the influence of the parameters of reversible surface plastic deformation on the parameters of the surface waviness of cylindrical parts made of steel 45, are presented. The proposed method implemen-tation for finishing and hardening treatment requires the development of a device for the formation of a reversing circular motion of the working tool. On completion of experimental studies using the PyCharm computer program and Python pro-gramming language, optimal modes of simplification were determined, providing the lowest waviness height.

Publisher

Bryansk State Technical University BSTU

Subject

General Earth and Planetary Sciences,General Environmental Science

Reference24 articles.

1. Прилуцкий В.А. Технологические ме-тоды снижения волнистости поверхностей. М: Машиностроение, 1978. 136 с., Prilutskiy V.A. Processing surface wavi-nessreduction technique. M: Mashinostroenie, 1978, 136 p.

2. Суслов А.Г. Качество поверхностного слоя деталей машин. М.: Машиностроение, 2000. 320 с., Suslov A.G. The quality of the surface layer of machine parts. M: Mashinostroeniye, 2000, 320 p.

3. Одинцов Л.Г. Упрочнение и отделка деталей поверхностным пластическим дефор-мированием. М.: Машиностроение, 1987. 328 c., Odintsov L.G. Strengthening and finishing of parts by surface plastic deformation. M: Mashi-nostroenie, 1987, 328 p.

4. Смелянский В.М. Механика упрочне-ния деталей поверхностным пластическим де-формированием. М.: Машиностроение, 2002. 300 с., Smelyansky V.M. Mechanics of harden-ing of parts by surface plastic deformation. M: Mashinostroenie, 2002, 300 p.

5. Гуров Р.В. Формирование качества по-верхностного слоя при отделочных и отделоч-но-упрочняющих режимах отделочно-упрочняющей обработки поверхностным пла-стическим деформированием // Вестник Брян-ского государственного технического универ-ситета. 2011. № 3 (31). С. 67–73., Gurov R.V. Surface bed finish develop-ment in finishing and hardening modes of finish-ing-hardening treatment using sur-face plastic de-formation technique. Bulletin of Bryansk State Technical University, 2011, no. 3 (31), pp. 67–73.