Affiliation:
1. Kamyshinskiy tehnologicheskiy institut – filial Volgogradskogo gosudarstvennogo tehnicheskogo universiteta
2. Kamyshinsky Institute of Technology
Abstract
The scientific principles of improving the system of automated planning of technical processes in the conditions of multiproduct machining industries are viewed. The study of modern approaches to automation of design and implementation of machining processes taking into account the production situation, is carried out. The use of the system of automated planning of multiproduct machining processes is justified, because its basic procedure includes a possibility of real-time interaction between subsystems design and implementation of technical processes, where the key place is occupied by a database on the technological capabilities of equipment and tooling. The interrelation of the system of automated planning of multiproduct machining processes with subsystems for assessing production manufacturability, monitoring technological equipment state, control and measuring procedures and assembly, is shown. The principle of designing multiproduct machining processes, generated for a given range of parts, taking into account the condition and capabilities of the production system, is presented. It is proposed to use the value of the total manufacturing time of a given range of parts as a generalized criterion for the efficiency of the production system. Ranking technique of design procedures according to the degree of influence of the decisions made on the generalized criterion of efficiency of the production system, is described. A model, based on genetic algorithms, is characterized, allowing the system being automatically adjusted to the conditions, changing during the design process. As a result, the efficiency of technological preparation of diversified production increases due to the rational distribution of manufacturing process for machining operation of parts to existing production facilities. The development of the work is aimed at increasing the level of design automation of machining processes and obtaining feedback on the current state of the production system.
Publisher
Bryansk State Technical University BSTU
Reference16 articles.
1. Шарапов С.Н., Зайцев А.В. Определение понятия многономенклатурного производства // Справочник. Инженерный журнал. 2019. № 6(267). С. 37–42. DOI 10.14489/hb.2019.06.pp.037-042. EDN FGZPLD., Sharapov S.N., Zaitsev A.V. Definition of the concept of diversified production // Handbook. Engineering magazine, 2019, No. 6(267), pp. 37–42. DOI 10.14489/hb.2019.06.pp.037-042. EDN FGZPLD
2. Чигиринский Ю.Л. Современное состояние и тенденции развития технологической подготовки машиностроительного производства // Наукоемкие технологии в машиностроении. 2020. № 8 (110). С. 29–35. DOI 10.30987/2223-4608-2020-8-29-35. EDN YUQPUL., Chigirinsky Yu.L. The current state and trends in the development of technological preparation of machine-building production // Science-intensive technologies in mechanical engineering, 2020, No. 8 (110), pp. 29–35. DOI 10.30987/2223-4608-2020-8-29-35. EDN YUQPUL.
3. Ингеманссон А.Р. Цифровая производственная система для механообрабатывающего производства: структура, функционирование, программный производственно-технологический комплекс и анализ технико-экономической эффективности // Наукоемкие технологии в машиностроении. 2020. № 11 (113). С. 30–39. DOI 10.30987/2223-4608-2020-11-30-39. EDN GNDDRO., Ingemansson A.R. Digital production system for mechanical engineering industry: structure, functioning, software production and technological complex and analysis of technical and economic efficiency // Science intensive technologies in mechanical engineering. 2020, No. 11 (113), pp. 30–39. DOI 10.30987/2223-4608-2020-11-30-39. EDN GNDDRO.
4. Суслов А.Г., Петрешин Д.И., Федонин О.Н., Хандожко В.А. Автоматизация управления параметрами качества поверхностного слоя и эксплуатационными свойствами деталей машин при обработке резанием // Наукоемкие технологии в машиностроении. 2019. № 8(98). С. 28–36 DOI 10.30987/article_5d2635cb62fb56.07245294. EDN RFSXJZ., Suslov A.G., Petreshin D.I., Fedonin O.N., Khandozhko V.A. Automation of control of the surface layer quality parameters and operational properties of machine parts during cutting processing // Science-intensive technologies in mechanical engineering,2019, No. 8(98), pp. 28–36. DOI 10.30987/article_5d2635cb62fb56.07245294. EDN RFSXJZ.
5. Иванов В. К. К решению основной задачи управления технологической подготовкой машиностроительного производства // Вестник Поволжского государственного технологического университета. Серия: Материалы. Конструкции. Технологии. 2021. № 2. С. 73–78. DOI 10.25686/2542-114X.2021.2.73. EDN OLKCXN., Ivanov V. K. Solving the main task of process design management for machine-building production // Bulletin of the Volga State Technological University. A run of: Materials. Constructions. Technologies, 2021, No. 2. pp. 73–78. DOI 10.25686/2542-114X.2021.2.73. EDN OLKCXN.