Improving the corrosion resistance of ground parts by smart use of ultrasonic field energy-Reference-Cited by-同舟云学术

Improving the corrosion resistance of ground parts by smart use of ultrasonic field energy

Published:2022-02-28 Issue:2 Volume:2022 Page:26-31
ISSN:2223-4608
Container-title:Science intensive technologies in mechanical engineering
language:en
Short-container-title:

Author:

Kiselev Evgeniy¹,Mazin Nikolay¹,Shtabov Nikita¹

Affiliation:

1. Ulyanovsk State Technical University

Abstract

The results of experimental studies of the effect of processing conditions on the corrosion resistance of ground parts made of stainless chromium-nickel steel of austenitic class 12X18N9T2 are quoted. It is found that the introduction of ultrasonic field energy into the zone of generation of geometry during grinding makes it possible to increase the corrosion resistance of parts by 12...15%, depending on the grinding mode.

Publisher

Bryansk State Technical University BSTU

Reference8 articles.

1. Лучкин, Р.С. Коррозия и защита металлических материалов (структурные и химические факторы). – Тольятти: Изд-во ТГУ, 2017. – 269 с., Luchkin, R.S. Metallics corosion and preven-tion(structural and chemical factors), Tolyatti: TGU Publ., 2017, 269 p.

2. Паршин, А.М., Тиханов, А.Н., Кикичев, Р.Н. Коррозия металлов в ядерном энергомашиностроении. - СПб: Политехника, 2000. – 104 с., Parshin, A.M., Tikhonov, A.N., Kikichev, R.N. Corro-sion of Metals in Nuclear Power Machine Engineering [in Russian], St. Petersburg: Politekhnika, 2000, 104 p.

3. Физико-технологические основы методов обработки / под ред. А.П. Бабичева / А.П. Бабичев, М.А. Тамаркин, В.А. Лебедев и др. – Ростов-на-Дону: Феникс, 2006. – 409 с., Physical-technological fundamentals of processing me-thods./ A.P. Babichev, M.A. Tamarkin, V.A. Lebedev, et al. Textbook, manual for universities, Rostov-on-Don, Phoenix, 2006, 409 p.

4. Кумабэ, Д. Вибрационное резание. – М.: Машиностроение, 1985. – 424 с., Kumabe, D. Vibrating cutting. Moscow: Mechanical Engineering, 1985, 424 p.

5. Киселев, Е.С., Малышев, В.И., Ковальногов, В.Н. Новые ультразвуковые технологии изготовления деталей машин. – Тольятти: ТГУ, 2014. – 327 с., Kiselev E.S., Malyshev V.I., Kovalnogov V.N. New ul-trasonic technologies of machine parts production. Tolyatti: TGU Publ., 2014, 327 p.