The mechanism of edge cutting machining of rolled iron from oxide scale-Reference-Cited by-同舟云学术

The mechanism of edge cutting machining of rolled iron from oxide scale

Published:2021-11-30 Issue:11 Volume:2021 Page:12-19
ISSN:2223-4608
Container-title:Science intensive technologies in mechanical engineering
language:en
Short-container-title:

Author:

Korolev Albert¹,Panfilova Anastasia¹,Iznairov Boris¹,Reshetnikova Olga¹,Pavlova Viktorya¹

Affiliation:

1. Yuri Gagarin State Technical University of Saratov

Abstract

A new purifying method of metal surface cleaning from oxide scale using a special rotating edge tool is described, which allows to solve the problem of increasing the extent of surface purification from oxide scale more efficiently, reliably and effectively. The process of the surface cleaning of flat- rolled products used for the manufacture of hollow sheres from oxide scale by mechanical action of a cutting tool on various layers of oxide scale is simulated. The force required to shift an oxide scale and the boundary conditions of the ratio hold-down pressure of the tool to the workpiece, the friction force in the tool support and the impact force of the scale on the tool, at which it is possible to remove the scale from the rolled surface, are determined.

Publisher

Bryansk State Technical University BSTU

Reference6 articles.

1. Теоретическое исследование процесса прохождения горячекатаной полосы через изгибно-растяжной окалиноломатель непрерывно-травильного агрегата / Д.В. Суфьянов, Н.Н. Огарков и др. // Производство проката. – 2012. – №10. – С. 31-34., Sufyanov, D.V., Ogarkov, N.N., Murzaeva, E.A. et al. Theoretical study of the process of passing a hot-rolled strip through a bending-stretching scale breaker of a continuously etching unit", Production of Flates (Proizvodstvo prokata), 2012, no. 10, pp. 31-34.

2. Определение основных параметров устройств для гидравлического удаления окалины / В.И. Руденко, Г.С. Суков и др. // Металлургическая и горнорудная промышленность. – 2004. – №4. – С. 28-30., Rudenko, V.I., Sukov,G.S. et al. Determination of the main parameters of devices for hydraulic oxide scale removal // Metallurgical and mining industry,2004, no. 4, p. 28-30.

3. Исследование возможности наиболее полного удаления окалины с поверхности катанки перед волочением / В.В. Парусов, А.Н. Савьюк и др. // Металлург. – 2004. – №6. – С. 69-72., Parusov, V.V., Savyuk, A.N. et al. Investigation of the possibility of the most complete removal of oxide scale from the wire rod before drawing //Metallurg, 2004, no. 6, p. 69-72.

4. Заявка 2014105408/02 Российская Федерация, МПК B08B 1/04 (2006.01). Способ очистки поверхности / Коро-лев А.В., Королев А.А. (РФ); заявитель Королев А.В., Королев А.А.; заявл. 13.02.2014; опубл. 20.08.2015, Бюл. № 23., Korolev A.V., Korolev A.A. Method of surface cleaning [Sposob ochistki poverkhnosti], application 2014105408/02 Russian Federation, IPC B08B 1/04 (2006.01), appl. 13.02.2014; publ. 20.08.2015, bul. no. 23

5. Исследование влияния режимов обработки на эффективность очистки листового проката для полых шариков от окалины / А.В. Королев, А.В. Панфилова и др. // Вестник Воронежского государственного технического университета. – 2020. – Т. 16. – №3. – С. 120-126., Korolev, A.V., Panfilova A.V. et al. Investigation of the influence of processing modes on the efficiency of cleaning sheet metal for hollow spheres from oxide // Bulletin of the Voronezh State Technical University, 2020,Vol. 16, no. 3, p. 120-126.