Technological support of physical-mechanical properties surface layer in parts at electro-mechanical finishing-Reference-Cited by-同舟云学术

Technological support of physical-mechanical properties surface layer in parts at electro-mechanical finishing

Published:2020-12-31 Issue:12 Volume:2020 Page:22-30
ISSN:2223-4608
Container-title:Science intensive technologies in mechanical engineering
language:en
Short-container-title:

Author:

Fedorov Vladimir¹,Suslov Anatoliy¹²³,Nagorkin Maksim¹

Affiliation:

1. Bryansk State Technical University

2. National Research Nuclear University “MEPhI”

3. Bauman Moscow State Technical University

Abstract

The problems in the parameter formation of cold work hardening and residual stresses of a surface layer in steel 45 parts at electro-mechanical finishing with the use of alternating current are considered. There are presented proce-dures for experimental investigations and their standard results as tables and diagrams. The analysis of processing factor impact upon characteristics under investigation is carried out. The simulators of their formation in the course of processing which can be used in practice are obtained. With the use of the method of simulation there is defined para-metric reliability of the technological system of electro-mechanical treatment on the characteristics of physical-mechanical properties of a surface.

Publisher

Bryansk State Technical University BSTU

Reference6 articles.

1. Рыжов, Э.В., Суслов, А.Г., Фёдоров, В.П. Технологическое обеспечение эксплуатационных свойств деталей машин – М.: Машиностроение, 1979. – 174 с., Ryzhov, E.V., Suslov, A.G., Fyodorov, V.P. Technological Support of Machinery Operation Properties – M.: Mechanical Engineering, 1979. – pp. 174.

2. Технологическое обеспечение и повышение эксплуатационных свойств деталей и их соединений / А.Г. Суслов, В.П. Федоров, О.А. Горленко [и др.]; под общ. ред. А.Г. Суслова. – М.: Машиностроение. 2006. – 447 с., Technological Support and Operation Properties Increase of Parts and Their Joints / A.G. Suslov, V.P. Fyodorov, O.A. Gorlenko [et al.]; under the general editorship of A.G. Suslov. – M.: Mechanical Engineering. 2006. – pp. 447.

3. Нагоркин, М.Н. Параметрическая надежность технологических систем чистовой и отделочно-упрочняющей обработки поверхностей деталей машин инструментами из сверхтвердых синтетических материалов. Монография / Под ред. А.В. Киричека. – М.: Издательский дом «Спектр», 2017. – 304 с., Nagorkin, M.N. Parametric Reliability of Technological Systems for Finishing and Finish-Strengthening of Machinery Surface with Super-Hard Synthetic Tools. Monograph / under the editorship of A.V. Kirichek. – M.: “Spectrum” Publishers, 2017. – pp. 304.

4. Суслов, А.Г. Федонин, О.Н., Польский, Е.А. Наукоемкая технология повышения качества сборочных единиц машин на этапах жизненного цикла // Наукоёмкие технологии в машиностроении. – 2016. – №5 (59). – С. 34-41., Suslov, A.G., Fedonin, O.N., Polsky, E.A. Science intensive technology for quality increase of assembly units of machinery at life stages // Science Intensive Technologies in Mechanical Engineering. – 2016. – No.5(59). – pp. 34-41.

5. Федоров, В.П., Суслов, А.Г., Нагоркин М.Н. Инженерные методы технологического обеспечения регламентированных параметров шероховатости функциональных поверхностей деталей машин в процессе механической обработки // Наукоёмкие технологии в машиностроении. – 2019. – № 4 (94). – С. 40-48., Fyodorov, V.P., Suslov, A.G., Nagorkin, M.N. Engineering methods for technological support of regulated parameters of operation surface roughness in machinery during machining // Science Intensive technologies in Mechanical Engineering. – 2019. – No.4(94). – pp. 40-48.

Cited by 2 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. ANALYSIS OF THE MICRO PROFILE FORMATION OF MACHINE ELEMENT SURFACES AT MACHINING STAGES AND RUNNING-IN CONDITIONS OF BOUNDARY FRICTION;Transport engineering;2023-09-12

2. Machinery operation properties increase by electro-mechanical treatment;Science intensive technologies in mechanical engineering;2021-02-28