SIMULATION MODEL OF PAD ELECTRIC-ARC LAYER GROWTH OF
Author:
Кузнецов Максим1, Kuznecov Maksim2, Крампит Максим1, Krampit Maksim2, Крюков Артем1, Kryukov Artem2, Ильященко Дмитрий1, Il'yaschenko Dmitriy2, Непомнящий Александр3, Nepomnyaschiy Aleksandr4
Affiliation:
1. Юргинский технологический институт (филиал) Томского политехнического университета 2. Yurginskiy tehnologicheskiy institut (filial) Tomskogo politehnicheskogo universiteta 3. Томский политехнический университет 4. Tomskiy politehnicheskiy universitet
Abstract
The purpose of the work consists in the development of a simulation model of pad geometrical parameters and in definition of optimum modes for the method developed for the electric-arc direct layer growth of metal parts. The formation of a simulation model was carried out with the aid of CONSOL Multiphysics program complex. The result processing of experimental investigations was carried out by means of Compass-3D software support. For the definition of geometrical parameters of the pad grown there were welded samples with a consumable electrode in the environment of protective gases. Further there were microsections made of each sample in the transverse direction. The microsections cut out were ground, polished with the use of ASM 10/7 NVL diamond paste. For the definition of the microstructure the microsections were etched in 4% alcoholic solution of nitric acid.
The results obtained of the pad geometrical parameters are well correlated with experimental data. The error makes some 1…3%. On the basis of the model offered there is defined an optimum range for modes of electric-arc layer growth ensuring the required pad geometrical parameters. A pad height makes 3mm, a pad width – 3.5mm.
Publisher
Bryansk State Technical University BSTU
Subject
General Earth and Planetary Sciences,General Environmental Science
Reference14 articles.
1. Tashev, P. Mathematical Modeling and Optimization of Parameters of the Mode for Tungsten-Inert Gas Remelting with Nanomodification of the Surface Layer / P. Tashev, P. Koprinkova-Hristova, T. Petrov, L. Kirilov, Y.J. Lukarski // Mater. Sci. Technol. - 2016. - № 24 (4). - Р. 230-243., Tashev, P. Mathematical Modeling and Optimization of Parameters of the Mode for Tungsten-Inert Gas Remelting with Nanomodification of the Surface Layer / P. Tashev, P. Koprinkova-Hristova, T. Petrov, L. Kirilov, Y.J. Lukarski // Mater. Sci. Technol. - 2016. - № 24 (4). - R. 230-243. 2. Peng, J. Mathematical model on characteristics of V groove molten pool during MIG welding / J. Peng, L. Yang // CIESCJ. - 2016. - № 67 (1). - Р. 117-126., Peng, J. Mathematical model on characteristics of V groove molten pool during MIG welding / J. Peng, L. Yang // CIESCJ. - 2016. - № 67 (1). - R. 117-126. 3. Жуков, В.В. Аддитивное производство металлических изделий (обзор) / В.В. Жуков, Г.М. Григоренко, В.А. Шаповалов // Автоматическая сварка. - 2016. - № 5-6. - С. 148-153., Zhukov, V.V. Additivnoe proizvodstvo metallicheskih izdeliy (obzor) / V.V. Zhukov, G.M. Grigorenko, V.A. Shapovalov // Avtomaticheskaya svarka. - 2016. - № 5-6. - S. 148-153. 4. Коржик, В.Н. Трехмерная печать металлических объемных изделий сложной формы на основе сварочных плазменно-дуговых технологий / В.Н. Коржик, В.Ю. Хаскин, В.И. Ткачук, С.И. Пелешенко, В.В. Коротенко, А.А. Бабич // Автоматическая сварка. - 2016. - № 5-6. - С. 127-134., Korzhik, V.N. Trehmernaya pechat' metallicheskih ob'emnyh izdeliy slozhnoy formy na osnove svarochnyh plazmenno-dugovyh tehnologiy / V.N. Korzhik, V.Yu. Haskin, V.I. Tkachuk, S.I. Peleshenko, V.V. Korotenko, A.A. Babich // Avtomaticheskaya svarka. - 2016. - № 5-6. - S. 127-134. 5. Kuznetsov, M.A. Methods for defining the concentration of nanostructured powders in protective gas and its effect on the microstructure of deposit metal / M.A. Kuznetsov, S.A. Barannikova, E.A. Zernin, A.V. Filonov, D.S. Kartsev // Applied Mechanics and Materials. - 2015. - V. 770. - Р. 28-33., Kuznetsov, M.A. Methods for defining the concentration of nanostructured powders in protective gas and its effect on the microstructure of deposit metal / M.A. Kuznetsov, S.A. Barannikova, E.A. Zernin, A.V. Filonov, D.S. Kartsev // Applied Mechanics and Materials. - 2015. - V. 770. - R. 28-33.
|
|