Affiliation:
1. Kaliningrad State Technical University
2. Kaliningradskiy gosudarstvennyy tehnicheskiy universitet
Abstract
The study objective is to predict the range of surface roughness obtained when milling a 45 steel workpiece on CFPE-250 machine. To achieve this objective, it is necessary to solve the following task: to assess experimentally the roughness of the resulting surface when milling a workpiece made of 45 steel on CFPE-250 machine and to identify the mathematical dependence of the roughness range on the treatment mode for this machine. Based on the theory of experiment planning, the mathematical dependence of the roughness range on the cutting speed, feed and cutting depth is found out. The dependence found allows calculating the roughness range and changing the parameters of the cutting mode. The probability of the measured roughness values belonging to the calculated ranges Ra ± ΔRa, micron is 75%. The novelty of the conducted study is in calculating the range of roughness described by the system of equations. This system of equations will be valid for the used CFPE-250 machine tools, the material to be machined (steel 45) and the tool material (hard alloy), subject to the ranges of cutting modes (cutting depth t=0.25...1 mm, feed S=50...200 mm/min and cutting speed V=15.7...62.8 m/min). Similarly, it is possible to find out a system of equations describing the range of roughness obtained for other machine tools (the more rigid the technological system is, the narrower the roughness range will be).
Publisher
Bryansk State Technical University BSTU
Reference15 articles.
1. Козлов, С. В. Влияние вибрации на качество фрезерованной поверхности деталей из титана и пути борьбы с вибрациями / С. В. Козлов // Инновации в науке. 2018. – № 8(84). С. 25-29., Kozlov SV. Influence of vibration on the quality of the milled surface of titanium parts and ways to combat vibrations. Innovations in Science. 2018;8(84):25-29.
2. Макаров, В. Ф. Повышение долговечности пресс-форм на основе направленного формирования шероховатости на формообразующей поверхности / В. Ф. Макаров, С. И. Кожевников // Известия Тульского государственного университета. Технические науки. 2017. № 8-1. С. 254-261., Makarov VF, Kozhevnikov SI. Increasing the durability of molds based on the directed formation of the roughness on a formative surface. Izvestiya Tula State University. Technical Sciences. 2017;8-1:254-261.
3. Мельничук, П. П. Обработка плоских поверхностей чистовыми торцовыми фрезами / П. П. Мельничук, Г. Н. Выговский, А. А. Громовой // Металлообработка. 2002. № 3(9). С. 9-13., Melnichuk PP, Vygovsky GN, Gromovoy AA. Processing of flat surfaces with finishing end mills. Metalworking. 2002;3(9):9-13.
4. Отряскина, Т. А. Прогнозирование шероховатости обрабатываемой поверхности на основании исследования деформационных процессов при резании / Т. А. Отряскина, Д. А. Павловская // Ученые записки Комсомольского-на-Амуре государственного технического университета. 2022. № 1(57). С. 83-87. DOI: 10.17084/20764359-2022-57-83., Otryaskina TA, Pavlovskaya DA. Forecasting the roughness of the treated surface based on the study of deformation processes during cutting. Scholarly Notes of Komsomolsk-on-Amur State Technical University. 2022;1(57):83-87. DOI: 10.17084/20764359-2022-57-83.
5. Оценка точности контроля шероховатости поверхностей изделий машиностроения / Е. Г. Кравченко, В. В. Алтухова, Е. А. Середкина, А. С. Гамаюнова // Ученые записки Комсомольского-на-Амуре государственного технического университета. 2021. № 5(53). С. 55-64. DOI: 10.17084/20764359-2021-53-55., Kravchenko EG, Altukhova VV, Seredkina EA, Gamaiunova AS. Estimation of the accuracy of control of the surface room of machine-building products. Scholarly Notes of Komsomolsk-on-Amur State Technical University. 2021;5(53):55-64. DOI: 10.17084/20764359-2021-53-55.