Author:
Xu Xiyu,Li Zhenmei,Ma Rui,Li Haitao,Zhang Fuwei
Abstract
This paper puts forward a new method based on Hilbert-Huang Transform (HHT) and Wavelet denoising for extracting feature information of voltage flicker signal. Firstly, envelope signal could be extracted by using HHT from original signal containing noises. Then the noises and higher harmonic components of envelope signal could be removed by using Wavelet denoising. Finally, the noise-removing envelope signal could be decomposed by using Empirical Mode Decomposition (EMD) for getting accurate amplitude modulation wave. The new method was applied to virtual instrument by using the MATLAB script node in LabVIEW. Experimental results show that this new method is applicable for analyzing voltage flicker signal both in time domain and frequency domain. The accurate time, amplitude and frequency of voltage flicker signal which is mutational and non-stationary can be obtained by using this new method.
Publisher
Bentham Science Publishers Ltd.
Subject
Electrical and Electronic Engineering
Reference20 articles.
1. Bhattacharyya S, Cobben S, Myrzik J, Kling W.
Flicker propagation and emission coordination study in a simulated low voltage network.
Eur Trans Electr Power
2010;
20
: 52-67.
2. Maksic M, Papic I.
Analysis of flicker propagation with representative samples of network voltage.
IEEE Trans Power Deliv
2011;
26
: 2066-7.
3. Montanari GC, Loggini M, Cavallin IA, Pitti L, Zaninelli D.
Arc furnace model for the study of flicker compensation in electrical networks.
IEEE Trans Power Deliv
1994;
9
: 2026-36.
4. Li ZM, Shen J, Liu W, Wang YJ.
Voltage flicker monitoring based on virtual instrument and wavelet packet transform.
Int J Adv Comput Technol
2012;
23
: 466-74.
5. Liu Y, Yang HG.
Voltage flicker detection based on independent component analysis.
Electr Power Autom Equip
2007;
27
: 34-7.