Evaluation of Pollen Adhesion to Verofilcon-A Soft Contact Lenses

Abstract

Purpose: A new 1-day disposable soft contact lens (SCL), verofilcon-A, constructed of silicone hydrogel material, has recently become available in Japan. This SCL has a very smooth surface produced by using the SMARTSURFACE ® Technology, and it was expected that pollen particles and protein components would not adhere easily to its surface. We examined the degree of pollen adhesion to the surface of the verofilcon-A material SCL and compared the results with those of other 1-day disposable SCLs (1DSCL). Methods: To determine the number of pollen grains attached to the surface of different types of SCLs, 0.01 mg/ml of cedar pollen solution was dropped onto the surface of 13 types of 1DSCL. After 24 h, each 1DSCL was rinsed in a shaker and washed five times with saline (n = 10 for each 1DSCL type). The number of pollen particles adhered to the 1DSCL and the percentage of surface area occupied by pollen was determined. Results: The number of pollen particles on the 1DSCLs ranged from 0 to 185 in the 200 × 200 µm area. The number of particles was lowest in the delefilcon-A and verofilcon-A SCLs with 0 particles, and the number was higher in the other 11 1DSCLs. The number of pollen particles was negatively correlated with the water content (r = −0.48), oxygen permeability (Dk; r = −0.43), oxygen transmissibility (r = −0.42), and center thickness (r = −0.33) of the 1DSCLs. The pollen adhesion area ranged from 0.0% to 3.1% and was lowest in the delefilcon-A and verofilcon-A 1DSCLs. There were significant differences in the pollen adhesion area between colored 1DSCLs (2.73 ± 1.97%) and clear 1DSCLs (1.03 ± 1.01%, P<0.001) and between hydroxyethyl methacrylate-based 1DSCLs (1.84 ± 1.45%) and silicone hydrogel-based 1DSCLs (0.05 ± 0.16%, P<0.001). Conclusion: These findings indicate that the verofilcon-A 1DSCL processed with SMARTSURFACE™ Technology is an excellent option for SCL users with allergic conjunctivitis during the high pollen season.