Lubricant ageing effects on the friction characteristics of wet clutches

Author:

Berglund K1,Marklund P1,Larsson R1

Affiliation:

1. Division of Machine Elements, Luleå University of Technology, Luleå, Sweden

Abstract

The friction characteristics and performance of wet clutches have been investigated by several authors. Studies have also been made to understand the frictional performance during the service life of the clutch system. However, most lifetime studies have been conducted for systems with paper-based friction material so that systems using sintered bronze friction material remain largely unexplored. To study the friction performance of how these systems can vary over time, the friction characteristics for a clutch system using lubricants aged in three different ways were compared. The effects on friction characteristics resulting from oxidation of the lubricant, reduced additive concentration, and ageing under real operating conditions in a wet clutch test rig were studied. The oxidation effects on friction characteristics were examined using a modified waterless turbine oil oxidation stability test on a fully formulated lubricant. Five oxidation time periods from 48 to 408 h were investigated. For each period of oxidation, a friction performance test was run using a pin-on-disc machine. The ageing carried out in a wet clutch test rig is a standard test of a wet clutch systems manufacturer which is used in order to verify that an oil-friction disc combination will last the full service life of the specific application. This test gives a realistic ageing process similar to that in a wet clutch in a field test. Under boundary-lubricated conditions, additives are vital to the performance of wet clutches. Therefore, the effect of reducing the additive concentration in the oil was also studied, in the range of 10 to 100 per cent of the original additive package used in the fully formulated wet clutch lubricant. Results showed that a general friction increase can be observed for oxidation, additive reduction, and test rig ageing. It was also concluded that different methods of simulating the wet clutch ageing process differ and cannot be directly correlated with each other.

Publisher

SAGE Publications

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering

Cited by 20 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

1. Influence of the steel disk on the NVH behavior of industrial wet disk clutches;Industrial Lubrication and Tribology;2024-08-13

2. Essentials and Future Progress of Green Tribology in Industry 4.0;2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG);2024-04-02

3. Influence of a transmission oil degradation on physico-chemical properties and tribological performance;Tribology International;2024-03

4. Influence of Oil Degradation on Power Losses and Thermal Behaviour of a Gear Transmission Test Rig;2024

5. Cooperative effects of control parameters on the dynamic responses of vehicle powertrain during start-up process;Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering;2021-12-30

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3