A Three-Dimensional Analysis of Piston Ring Lubrication Part 1: Modelling

Abstract

The study of piston ring lubrication in internal combustion engines has remained a very active area in tribology. Theoretical analyses have been developed by many researchers to predict the performance characteristics of piston rings, but almost all previous models established were based upon the assumption that ring/cylinder geometry was axisymmetric. This may not be adequate for modern-day engine design since it is well known that cylinder bores are not perfectly circular. They suffer radial distortions which arise for various reasons. In the current work, a three-dimensional model has been developed to account for the effects of bore out-of-roundness. In order to do this, the three-dimensional Reynolds equation was solved cyclically using the finite difference method in fully flooded lubrication conditions. In this part of the paper, the theoretical model is presented and the effect of bore shape on piston ring performance is examined with three proposed types of bore (circular, elliptical and four-lobe). The results have shown that piston ring performance is significantly dependent on the bore shape or bore out-of-roundness.