Development of a wear-resistant surface layer for a tool to be used for high-temperature stainless steel rolling-Reference-Cited by-同舟云学术

Development of a wear-resistant surface layer for a tool to be used for high-temperature stainless steel rolling

Published:1999-06-01 Issue:6 Volume:213 Page:473-480
ISSN:1350-6501
Container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Author:

Tsubouchi K¹,Akiyama M¹,Tsumura M¹,Amano S²

Affiliation:

1. Sumitomo Metal Industries Limited Corporate Research and Development Laboratories Amagasaki, Japan

2. Sumitomo Metal Industries Limited No. 1 Tube Making Department, Wakayama Steel Works Wakayama, Japan

Abstract

A new method for a tool surface reinforcing coating was presented to prolong the tool life for hot stainless steel rolling above 1473 K. It is basically by welding a Co-based matrix powder mixed with an NbC powder on the surface of a medium-carbon steel using plasma transferred arc (PTA) welding technology. The new tool covers the region where the PTA welded tool for hot stainless steel rolling reinforced by BS 316S12 and NbC powders developed by the present authors fails to show as good a performance as for the rolling under 1473 K. In the laboratory tests, the new tool showed an excellent performance among the trial combinations of matrix and carbide powders, and its superiority was verified through a test rolling by an elongator in a Mannesmann plug mill line.

Publisher

SAGE Publications

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/1350650991542820

Reference5 articles.

1. The Fabrication of Fe-carbide Composite Using Plasma-Powder-Melting Method and It's Properties

2. The Fabrication of Co Alloy-carbide Composites and 3-dimensional Model Using Plasma Powder Melting Method

3. Development and Optimization of Carbide-Reinforced Tools and Application to Hot Rolling of Stainless Steel

4. Technical Note: Investigation and improvement of the resistance against crack propagation for a hot steel rolling tool material

Cited by 11 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effect of welding conditions on erosive wear of hard-faced Co-based alloy layer;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2018-01-19

2. Pulsed laser ablation and deposition of niobium carbide;Applied Surface Science;2016-06

3. Tribology in metal forming at elevated temperatures;Friction;2015-03

4. Sputter deposited NbC x N y films: Effect of nitrogen content on structure and mechanical and tribological properties;Surface and Coatings Technology;2014-11

5. Estimation of Roles of Matrix and NbC Particles Dispersed in Surface Layer of Tool by PTA Welding;Procedia Engineering;2014