Investigation of the role of dislocation motion in the generation of acoustic emission from metal cutting-Reference-Cited by-同舟云学术

Investigation of the role of dislocation motion in the generation of acoustic emission from metal cutting

Published:2009-07-16 Issue:12 Volume:223 Page:1507-1518
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Araújo A J M M¹,Wilcox S J²,Reuben R L³

Affiliation:

1. Universidade de Aveiro, Campo Universitário de Santiago, Aveiro, Portugal

2. Department of Engineering, University of Glamorgan, Pontypridd, UK

3. School of Engineering and Physical Sciences, Heriot-Watt University, Riccarton, UK

Abstract

Due to the very high strain rates and temperatures encountered in metal cutting, opposing viscous damping forces are the dominant mechanism governing dislocation movement, which is the main mechanism for plastic deformation in metals. However, although viscous damping governs the physics of metal deformation, it is concluded that the detected high frequency acoustic emission (AE) signals arising from metal cutting can only be generated owing to the interaction between moving dislocations and obstacles. This would appear to be the reason why the amplitude of the AE signal cannot be directly related to the cutting power, since it arises from a different generation mechanism. As a result, a qualitative model relating the AE to basic deformation parameters was derived, in which the power of the AE is expected to increase with strain and strain rate, but to decrease with temperature. In addition, the frequency content of the AE is expected to increase with strain rate, to decrease with temperature, and to remain unchanged with strain. These results were validated against data from experimental cutting tests and seem to suggest that the generation of the AE during metal cutting is very heavily dependent on dislocation motion.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/09544054JEM1448

Reference37 articles.

1. Inasaki I., Yonetsu S. ‘In-progress detection of cutting tool damage by acoustic emission measurement.’ In Proceedings of the 22nd International Machine Tool Design and Research Conference, UMIST, Manchester, September 1981, pp. 261–268.

2. Lan M. S., Dornfeld D. A. ‘Experimental studies of tool wear via acoustic emission analysis.’ In Proceedings of the 10th North American Manufacturing Research Conference, McMaster University, Hamilton, Ontario, May 1982, pp. 305–311.

3. Messaritis V., Borthwick W. K. D. ‘Processing acoustic emission signal data for characterising cutting tool wear and chip management.’ In Proceedings of the 1st International Conference on Computer-aided production engineering, Edinburgh, April 1986, pp. 261–268, (IMechE).

4. Naerheim Y., Lan M. S. ‘Acoustic emission reveals information about the metal cutting process and tool wear.’ In Proceedings of the 16th North American Manufacturing Research Conference, University of Illinois, USA, May 1988, pp. 240–244.

5. A Study on Acoustic Emission from the Orthogonal Cutting Process

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. An experimental study of acoustic emissions from active surface degradation in planetary gears;Mechanical Systems and Signal Processing;2023-04

2. Tool wear evaluation under minimum quantity lubrication by clustering energy of acoustic emission burst signals;Measurement;2019-05

3. Scratch deformation mechanism of copper based on acoustic emission;Insight - Non-Destructive Testing and Condition Monitoring;2016-05-01

4. Acoustic emission in scratch processes of metals;Insight - Non-Destructive Testing and Condition Monitoring;2015-11-01

5. Feasibility of online determination of the quality of 304L stainless steel machined components using acoustic emission;Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture;2013-06-10