Friction and wear of polytetrafluoroethylene reservoirs embedded into metallurgical coatings-Reference-Cited by-同舟云学术

Friction and wear of polytetrafluoroethylene reservoirs embedded into metallurgical coatings

Published:2005-02-01 Issue:2 Volume:219 Page:107-115
ISSN:1350-6501
Container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Author:

Tobe S¹,Yamane M¹,Stolarski T. A.²

Affiliation:

1. Ashikaga Institute of Technology Department of Mechanical Engineering Ashikaga, Japan

2. Brunel University Department of Mechanical Engineering Uxbridge, Middlesex, UK

Abstract

Assessment of tribological performance of polytetrafluoroethylene (PTFE) reservoirs embedded into two metallurgical coatings [copper-aluminium (Cu-Al) alloy and molybdenum] and arranged in three different patterns was the main aim of studies reported in this paper. PTFE reservoirs were arranged in such a way that the load on the contact, at any given moment, was supported by both PTFE and hard coating. Two different contact configurations were used. Of the two coating materials used, the Cu-Al performed better in terms of friction force magnitude. Performance of the three different shapes of PTFE reservoirs depends on both the coating material and the contact configuration.

Publisher

SAGE Publications

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1243/135065005X9781

Reference11 articles.

1. The friction and wear of poly(tetrafluoroethylene)-poly (etheretherketone) composites: An initial appraisal of the optimum composition

2. Combined rotating and linear motion effects on the wear of polymers

3. On the wear behaviour of short-fibre-reinforced peek composites

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. In situ micro-fibrillization and post annealing to significantly improve the tribological properties of polyphenylene sulfide/polyamide 66/polytetrafluoroethylene composites;Composites Part B: Engineering;2021-07

2. Rolling Contact Fatigue Behavior of Thermal-Sprayed Coating: A Review;Critical Reviews in Solid State and Materials Sciences;2019-10-01

3. Dry Sliding Wear Behaviour of Plasma SprayedAl2O3-30%Mo and Mo Coating;Procedia Materials Science;2014

4. Tribological Performance of PTFE–Metal Binary Coatings in Rolling/Sliding Contact;Tribology Letters;2012-04-01

5. A study on friction and wear properties of PTFE coatings under vacuum conditions;Wear;2010-06