Affiliation:
1. Imperial College of Science Department of Mechanical Engineering Technology and Medicine, London, UK
Abstract
This paper reviews the historical development of optical interferometry as applied to the study of lubricant films. The technique was first applied to lubricated contacts in the 1960s, when it played an important role in the validation of the elastohydrodynamic theory of lubrication. Initially the method was not suited to the study of mixed and boundary lubrication because it could not measure film thicknesses of less than about 50 nm. In the 1970s, however, this limitation was partially overcome by the use of a spacer layer and this, coupled in the early 1990s with spectrometric analysis of the interfered light, enabled films down to just 1 nm thick to be measured in lubricated contacts, well within the boundary lubrication regime. Recently a number of workers have applied colorimetric image analysis to optical interference images to enable accurate three-dimensional maps of film distribution in lubricated contacts to be determined. This approach, coupled with the use of a spacer layer, has led to the spacer layer imaging method, which can map film thickness in boundary and mixed lubricated contact. Some recent applications of this technique are described.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering
Cited by
62 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Measurement Techniques;Schey’s Tribology in Metalworking;2023-09-30
2. Advances in Tribology Driven by Surface Science;e-Journal of Surface Science and Nanotechnology;2023-05-10
3. 表面科学によるトライボロジーの進展;Vacuum and Surface Science;2023-05-10
4. Influence of Free Water Droplets on Film Formation Under Point Contact Grease Lubrication;Journal of Tribology;2023-04-25
5. The effect of aviation anti-wear additives on tribofilm formation and micropitting propensity;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2023-04-11