Affiliation:
1. Lulea University of Technology Division of Machine Elements, Sirius Laboratory Lulea, Sweden
2. University of Central Lancashire Jost Institute for Tribotechnology, Department of Technology Lancashire, UK
Abstract
The influence of pad facing material on hydrodynamic lubrication in tilting-pad thrust bearings is investigated in terms of pad and oil-film temperatures and thicknesses. Two tilting-pad thrust bearings are examined: one with babbitt pad facing, the other with a layer of PTFE-based composite material. Frictional torque, pad, collar, and oil-film temperatures and thicknesses are all monitored by means of a comprehensive array of sensors mounted in the bearing and shaft. A considerably smaller range of temperature is seen in the steel backing immediately below the surface material for the PTFE faced pads. Oil-film temperatures measured at the mid-point on the pad trailing edge show no significant difference between the two bearings. Oil-film thicknesses in the two bearings are seen to differ. At the leading edge, oil-film thickness is thinner for the PTFE pad than for babbitt. However, at the trailing edge the PTFE pad has the thicker film.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering
Cited by
17 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献